venerdì 30 dicembre 2011

martedì 27 dicembre 2011

venerdì 23 dicembre 2011

Scene file setting



Setup 1: Video Cam | V Detail -0 | Detail -0 | Detail Coring +0 | Chroma level +0 | Master Ped -0 | HD Norm | Matrix Norm 2

Setup 2: Video Cam | V Detail -5 | Detail -5 | Detail Coring +4 | Chroma level +4 | Master Ped -3 | Cine-Like d | Matrix Norm 2

Setup 3: V Detail -4 | Detail -4 | Detail Coring +2 | Master Ped -2 | Cine-Like V | Matrix Norm 2
Setup 4: Detail -2 | Detail Coring +2 | Master Ped -0 | Cine-Like D | Matrix Cine-Like

Setup 5: V Detail +3 | Detail Coring +2 | Master Ped -4 | B-Press | Matrix Norm 2

Setup 6: Detail +1 | Detail Coring -1 | Master Ped -1 | Cine-Like V | Matrix Cine Like

Quote from the video's author:
"As I did this comparison I noticed you could almost pick anyone just get the exposure right and it looks good. I will use nr 6 when am recording. And setup 2 is the most common referred to but look at it compared to setup 1 and you see that you loose all definition in the hedgehogs fur. Image becomes noticeably soft".
Original Link from youtube

Last low light setting Ag-hmc 151E


Rec format= 1080 25p/50i
Iris open (+ shutter on 1/25)
Detail level +5
V detail level +6
Detail coring +5
Chroma level +3
Chroma phase -4
Color Temp Ach -1
Color Temp Bch +2
Master Ped -12
A.iris level -1
*DRS 2
Gamma B-Press
*Knee Auto
Matrix Norm1
Skin Tone DTL On

*Modificabili solo con alcuni rec format



lunedì 19 dicembre 2011

How to clean an AG-HMC 151E's viewfinder deep inside

Svitare (in senso antiorario) l'attacco in plastica rigida che supporta l'elemento in gomma morbida.

Vi rimane questo pezzo da una parte.


Ruoto la ghiera della lente del viewfinder in senso antiorario in modo che la lente venga avanti (freccia arancione).
Fatto questo svito le tre che si vedono attorno alla lente ed estraggo l'elemento circolare in plastica.
A quel punto, rovesciando la telecamera su una superficie morbida fascio scivolare fuori la lente stessa. Pulisco LCD. Rimetto la lente (occhio al verso). Riavvito l'elemento circolare. E dovrebbe esssre tutto OK. 


Se questa spiegazione non è sufficientemente chiara a breve arriverà il video tutorial di tutta l'operazione.

Userò questa serie di cacciaviti:

giovedì 8 dicembre 2011

Drunk Santa